Archive for December, 2013

Regulation Of Plastic Windows

December 17th, 2013

In the case of plastic windows installed in the new house is required to regulate. The problem is that new buildings must shrink (shrink. Due to the shrinkage of the buildings violated a perfect seal system consolidations. Geometry and density of the windows do not have to suffer. When the operation control can change the situation through the shutter supplies is very important.

Perfect accessories to ensure regulation in three planes and two points of rotation, as well as regulation of the degree of clips shutter to the structure of the entire perimeter of the window opening. Horizontal control the main loop of the group can move main angle on the left – right, at the same time including shutters – or counter-clockwise around the bottom of the loop. And horizontal adjustment of the lower loop allows to move the lower left corner – right simultaneously including shutters – or counter-clockwise around the main loop. Due to the vertical control of the lower loop knot group holds fall recovery. In addition, it is possible to change the angle rotation along the horizontal axis of rotation, coinciding with the departure window, fixing the shutter by controlling the structure of the main loop of the group.

In the case of incorrect fitting window shutters can hang on the bottom loop. To restore the normal functioning of the window, click on the bar far side of the shutter (perpendicular to its surface), is the main corner closest to the loop. One hand to press the lever blocker located on the shutter in the pen and the second to turn the handle in a horizontal position. Scissors on the shutter and the structure should incorporate. Can then be released the lever blocker. Thus, all manipulations handle must be made exclusively in a closed window frame.