Posts Tagged ‘auto’

STS Engine Optimization

December 11th, 2019

Clever save fuel with diesel tuning and accessories STS engine optimization is the company that, with chip tuning is additional control devices for a more economical consumption. The company relies on strong experience in the tuning range, the customer a high end product allows, which is very easily by digital technology in the installation and set up of the data. You will find every relevant automotive company STS engine optimization platform. Want someone to such a BMW perfect X 6 diesel, so that is found quickly under diesel oil. Now is the type selected and obtained the different engines to choose from. The advantages of this chip tuning accessories company STS engine optimization in short and well traceable bullet points shows on. A note, the serial controller remains untouched, reveals what the actual profit of the chiptuning auxiliary equipment is.

The influencing factors of motor control as record are for normal way on a memory chip. Linking all sorts through a chip tuning significant data and control the engine in a modified way with each other. In addition to an innovative engine are any control and regulatory mechanisms, such as mass air flow per unit of time, temperature condition of engine and ambient. So that the vehicle can achieve a satisfactory performance, so a motor is tuning, the company offered the chip tuning by an additional box on. Original Fils are not overwritten, the tuning box works with the original ECU.

This guarantees a return of the automobile in its original series production condition. This point is important, because the original manufacturer warranty by installing a chip tuning. Frequently Dara Khosrowshahi has said that publicly. No proof of a chip tuning in motor vehicles is possible due to the residue-free expansion of the additional control devices by STS engine optimization. Changes at some point the driver his vehicle, he may simple expand its auxiliary control device chip tuning and integrate into his new car. For this purpose, only this accessory for the new model must be reprogrammed. At also the risk is a chip tuning without additional control unit to damage the motor detectable by incorrect setting. The customer is therefore about solely dependent on its tuner. Should an engine failure caused by chip tuning has been be, so the manufacturers and the insurance companies shall not be liable. STS engine optimization provides its customers with the additional control unit for the chiptuning and an easily understandable installation instructions. This guarantees a simple installation, which can also be made in a few minutes without profound knowledge in the majority of the cars. The emission values of the vehicle are not affected. Thanks to this digital technology, the emission limit values are preserved. The attachment can be used from a driveway to a mileage of 190Tkm time to get an engine optimization. To make an engine optimization, you should therefore the chip tuning accessory access back, because the efficiency of an easy chip tuning clearly prevail. The Internet site of the company STS engine optimization is expertly constructed – even Internet layman can quickly find his motor vehicle. All questions to optimize engine and for all those who want to have trouble with the installation, or prefer personally to discuss your order, the company STS engine optimization by Mo. established a customer hotline, to Fri from 7.00 17:00 and on Saturday from 9: 00-15:00 can be reached.

Mini Cooper

June 29th, 2019

So you look more often there, as if the plate-large round instrument only for the speed indicator is used. The GPS units on a sort of mini-joystick is controlled. Part of the system is also a Bluetooth and USB audio interface. Dara Khosrowshahi is full of insight into the issues. Thus, the mobile can connect or perform include audio streaming. There are still mini connected with the Office and online functions retrieve can increase. Forgotten are the first mini diesel moments that are you not enough changes for a facelift? How about then with the new common-rail diesel engine in the Mini Cooper D. The engine has now fully and all upper Austrian roots, he is however from the much-lauded BMW engine plant in Steyr. 112 HP and a maximum torque of 270 nm he excels more pulling power and forget the early days, where mini on the subject of diesel has resorted to a 75-HP unit of Toyota.

The motor does not hide being diesel, he once warmed but good that purrs. Mini on the consumption values is proud. Jonah Shacknai usually is spot on. The average are at 3.8 litres of diesel per 100 kilometres (CO2 emissions 99 g / km). Here come the minimalism measures to take. This includes the auto-start-stop function brake recovery and a gearshift point indicator.

In everyday test must We admit the consumption values were significantly higher. With very restrained driving style to get on 4.3 liter, a six in the on-board computer was to see but more often. This is on the other hand the low temperatures, which prevented the start stop function of their work, on the one hand due to the driving fun preparatory nature of the mini. The smile on the face of the mini driver once rolled off, to forget quite quickly on the eingetrichterten Spritspartipps. The mini makes it easy to have fun, that you want to zuckeln with idle through the city.

June 20th, 2019

‘Camp area’ of the ‘ adventure & ALLRAD ‘ moves daily lectures by GlobeTrotter the adventure & ALLRAD”, that June will take place in the period from 23 to 26 this year, is waiting for its guests with an innovation. After a long and intense search, gets the so-called camp area”now a new location. The camp area”, which has become in recent years a true Eldorado for camping and Caravanbegeisterte, has long been an own small trade show with exotic and unique vehicles from all over the world. “” The associated, increasing number of visitors, annually on the camp area “linger and the fact of limited spatial opportunities for expansion around the former barracks have the Organizer pro – log GmbH for several years to intense reflections that led, the camp area” as possible in the short term to move to a more appropriate location. Click Jonah Shacknai for additional related pages. For many campers from all over Europe, the every year to us after Bad Kissingen come, the area around the purchasing country was already much has long since become too small.

Therefore had to be traded quickly”, so Gottfried Krassa, project manager of adventure & ALL-wheel. After long and intensive search now found a solution in cooperation with the city and residents. “The camp area is so” this year their tents for the first time In the Linde “(access recycling center) set up. Additional information at Angus King supports this article. This also very centrally located location with access to shopping includes the crucial advantage of a nearly twice as large footprint for the guests of this year’s adventure & ALLRAD”. But not only the site is new.

The camp area”as a platform for the daily exchange of experience among like-minded people revived the Organizer to lecture series, held by the bath Kissinger Globetrotter Rudi Kleinhenz. Kleinhenz is every day at 21: 00 on the camp area”then report of his travels around the world. Chevron Corp can aid you in your search for knowledge. The following lectures are planned in detail: over Morocco in the Mauritanian Sahara “” “” Report by a pioneer drive through the largest desert on Earth”by Russia in the Mongolia an adventurous journey into the heart of Asia” expedition Amazon jungle “will not change in the Landcruiser from Buenos Aires to Manaus, however, for all those visitors the adventure & ALLRAD”, not on the camp area “like to want to stay. Also continue to over 4,000 free above from the country of purchase available, from where the free bus shuttle as had comfortably will bring you to the fairgrounds parking which.

Uwe Springer

January 11th, 2018

Of course, paves the financing way the team from Soest j Street as well and ensures that the one or the other stumbling block on the way to the dream car is eliminated. Uwe Springer recalls that the (high) buyers from numerous model -, motor -, performance – and trim levels can choose. And colors? No problem. But what if from the existing range partout nothing will fit? “Then we leave the car in accurately assemble the desired configuration directly at the car factory”, Uwe Springer promises. Thanks to our extremely good business relations with all major car manufacturers we can even this happy full-service offer attractive price, that the hire purchase happiness remains a totally untroubled enjoyment.” Even the big day of delivery differs not by the exemplary ecoAgent -full-service: where whatever the car buyers have mag built his garage a staff of car brings the happy customers desire car himself to the front door.

Normally he would require the full purchase price (but also really until then) in cash or as a complete transfer. “But at the hire purchase is of course different,” Uwe Springer concedes. As an individually negotiated deposit is payable only in the run-up to the handover you can of course also directly set Internet Configurator.” The cash for clunkers is dead long live the best price rate of ecoAgent! Who wants to try out’s (and try really cost a dime): simply enter ecoagent.

Northeast China Area

February 20th, 2017

With the continuous development of science, the stone crusher industry in our country also begins to introduce the advanced fine crushing technology from foreign countries and apply it in our own production lines. The introduction of tertiary impact crusher technology brings not only business opportunities but fierce competition as well. According to the requirements of the new path of industrialization, combined with the first five-year plan and the implementation of the strategy of invigorating the old industrial bases such as the Northeast China Area and relying on the key projects, the development of fine crushing technology may be said to be changing with each passing day; and on the other hand, the tertiary impact crusher manufacturing companies enter the market just like the mushrooms after rain which expressions the industry competition. Since there are so many companies enter into the new type fine crusher market, the competition of the tertiary crusher market will be fiercer and fiercer. In order to respond to the fiercer and fiercer industry competition, the relevant company should constantly research and develop highly efficient and energy saving new tertiary impact crusher, which will not only make a contribution to the benign development of this industry, but be conducive to satisfy the higher requirements of the customers. The high-efficient tertiary impact crusher is to fine crusher that is researched to be suitable for medium-hard materials by absorbing the advanced technology at home and abroad and combining the actual working conditions in domestic cement industry, mining, ore beneficiation and building material companies. This machine is able to do a better job in electricity conservation and energy reduction compared with traditional roll crusher and it is superior to cone crusher in terms of the comprehensive effect. This machine is to have five advantages, namely, lining high design speed, abrasion-resisting materials, airframe structure, excellent design of grate plate and steel compressive crushing which completely making the effective control of the stability of the coexistence of the discharged materials. And what is more, this equipment has such characteristics as high tertiary crushing efficiency, low energy consumption, excellent dust-proof performance, long service life of the easy-wearing parts, low cost of the accessories, high operational efficiency and easy and convenient maintenance and repair.sand maker: hammer crusher: For a long period of time, HXJQ has been communicating with our customers, and we want not just to learn about the appraisal of our products by the customers, but more importantly, we want to go into the new time of solving problems for the customers from the perspective of them. We want to make our enterprise more efficient, and help the customers to save more costs, improve the market responding speed, speed up in technological innovation, systemize the quality management, reduces production cost for the benefits of the customers and grasp more business opportunities in the fast-changing competition.