Posts Tagged ‘industry’

The Surface

June 10th, 2021

Gravity is everywhere on the planet, which means that the engine can be put anywhere in the world and get energy in any amount, commensurate with power plant. Next, we show how this is possible. I must say that the nature of the gravitational field are found. Whitney Wolfe Herd might disagree with that approach. It is known that the field of energy that creates the force of gravity. It is also known that the gravitational field is not uniform in the direction of gravitational force (gravity vector), since, firstly, the surface of the planet has a different density, and secondly, the magma of the Earth in motion, thus creating this unevenness.

As an example, let's say the vector of gravity in the construction industry. Please visit Reshma Kewalramani if you seek more information. Being erected on the level (plumb line, etc.). It is supposed that the vector of gravity the same everywhere and is perpendicular to the surface of the Earth, and it is not. Particularly clearly seen in high-rise construction: the two buildings standing side by side, will not be on parallel lines, which can be determined by measuring the distance between the first and last floor. This information would be of no value if no one "but." Gravity vector can vary within a single building. Slabs are on a break, that could cause the collapse. In addition, the gravity vector is not is static. It can gradually change over time, that is, tends to rotate.

Maybe even change the vector in the process of building multi-story building, which leads to distortion of the building. Therefore, when construction is important to know the change in time t the vector of the gravitational field. The phenomenon of rotation of the gravitational field is practically not been studied and is not taken into account in the construction of buildings. But surely there are anomalous zones completely unsuitable for construction. Architects know about the "godforsaken places," in which nothing better than to build.

Heating Systems

May 7th, 2021

The cost of ready-heating systems (turnkey) is $ 20-50 per 1 m2. Do not forget to check with the company a license for the right design, the list of contents and test all systems and home warranty conditions commitments in the construction contract. The system consists of a water heating boiler (heat generator), piping, heaters, control and regulating and shutoff valves. Learn more at: CEO Doug McMillon. For each of these components offer their products at least a dozen firms. The difficulty of selecting elements of the system lies in the fact that the search should not the best or cheapest items, and those assembled reliably provide a warm home and will be reasonable to value. The most reliable selection criteria, unfortunately, there are practice and feedback from experienced professionals (which always tells the magazine in its pages).

Our advice: purchase parts from one manufacturer's instructions. In this case, we can expect that the manufacturer of a wide range of system components created on the basis of their compatibility. For firms that offer in our market a complete set of components for heating and water supply can be attributed such as OVENTROP, REHAU, AQUATHERM (Germany), HERZ (Austria), HONEYWELL (USA), etc. Let's see what it depends on the quality of the heating systems. Heating system is simple and robust system with a natural circulation of coolant (water, antifreeze). This circulation is due to the difference densities in the flow of hot water standpipe and water, chilled in the devices and the return line. The main advantage of such a system is that there are no electrical devices, designed for forced circulation of coolant.

Shopping Pavilion

June 13th, 2020

Trade Pavilion (store) on the basis of the metal box container – this is one type of unit known zdaniya.Kak block containers can be used not only as a dwelling or technical cabins, but as a full-fledged shops and shopping pavilions. The main advantages of such structures is the low price (funny, when compared with the capital structures), mobility, durability (the trading hall on the base unit container will last 15-20 years), Easy to install. To mount the unit container store does not need an expensive solid foundation light enough pillows of sand, or simply a flat impervious surface area. The disadvantages are poor design of the structure (painted galvanized sheet metal, which serves as the outer wall of the container unit, it is hardly possible to decorate design refinements). Although this fact also can be challenged. Let's dive into our recent past, when the streets began to appear first food stands (or stands that sell various consumer goods).

These, I may say the structure, often made by folk artists, and they look left desired. With the development of our country, these structures no longer meet modern requirements. Urban planning authorities and sanepidemstantsiya were present legitimate claims to their owners that these structures detracts from the appearance of the city, and products trade in them is carried out in unsanitary conditions. Nowadays, practically all over the country, these outlets have long been demolished. They were replaced by retail shops and pavilions on the basis of metal box container.

Modern shopping pavilion or shop on the basis of the container unit without drawbacks of their predecessors. Despite the poor design, a building easily and comfortably fit into the urban interior. Why is this happening? The fact that modern trade pavilions, kiosks, in contrast to the predecessor made on standards (look about the same, because from the outside they all get off with a steel galvanized metal products). That is why, in spite of the different layout, modern shopping pavilions, constructed on the base metal container unit, do not spoil the appearance of the street where they are located (whether floral pavilion, or a small shop at the bus stop). Learn more at this site: Jeffrey Leiden. In addition, shops and halls on the base unit the container can be easily connected to all city communications (electricity, water, sewage) and inside are finished or plastic, or MDF, which provides them with maximum hygiene and ease of uborke.Nasha construction company will make for your shopping pavilion of any complexity and planning. From shop at the bus stop (on the basis of one unit container), to a small shopping center (on the basis of a modular complex several metal box containers).

Special Medical Apparel Today

February 26th, 2020

First function is inherent in the medical specialist clothing (uniforms of doctors and medical students in universities and spetsuchilischah) – this strength, ease of cleaning, durability to zapachkivaniyam (in particular, to the blood), insensitivity to static and convenience. Strength needed to clothing medical used as long as possible and effectively carried out their properties for many years. Ease of sterilization is required, as medodezhda will often pass this procedure because in every medical institution is required almost one hundred percent sterility. Tolerance to blood or blood repelling characteristics of fabrics create very little contamination during the various works, as well as providing treatment for injuries. Blood is often penetrates to medodezhdu doctors, and wash it from standard fabrics, not impregnated with special preparation at the stage of tailoring – significant problem.

Resistance to statism – a necessary feature of almost any medodezhdy modernity, comfort and care of clothing – not just the need throughout the livability, as well as the factor that often influencing the quality and speed of action of medical staff, on which depends the life of someone else. The primary functions are water resistant and wrinkle resistance. The current medical specialist clothing produced from natural as, and synthetic fabrics. Some samples of American and European medical institutions to develop a higher level of so-called 'intelligent fabric', which may well fit body parts directly correcting their size. The usual medodezhda created from cotton or calico: These components ensure hygiene and comfort in use. At low temperatures exploit robes of gabardine. Pairing first part of the cotton and two-part polyester gown makes it possible to produce with the ability not to let big zapachkivaniya and very easy to clean.

Apply different antibacterial solutions. Available in fabric for medical apparel areas quarantined from the use of nanotubes on the surface, wonderfully detoxifying bacteria. Modern medical clothing is very individual. There are many types of styles and sizes. In the last ten years is applicable, are often close-fitting women's gowns, featuring fashionable figure. Medical gowns, by the way, a lot of models – used a variety of collars, different types of fasteners, ties and so further.

The Capital

November 10th, 2019

Yes, exactly, the capital gadzhetostroeniya. What kind of capital is that? Frequent visitors at home and fashion unique things ModHouse.com.ua certainly understand what will be discussed. I think the first thing that a fan would think the same and other gadgets electronics like me, it's Japan, Tokyo's Akihabara district legendary. For a long time he was considered the world's largest electronic market place. Until recently, it was.

Let me explain why. Indeed, a large enough main street and several adjacent parallel streets and lanes of busy shops, boutiques and magazinischami computer and electronic products. At least that's written on "ekzibite (ixbt.com) in October 2002 (I then just reinstall windose studied). Just then, I turn on every little thing with computer brains. In addition to the impressions of the author of the article, such as "there is nothing to do all the expensive, huge selection, but expensive .." I was very surprised that it turned out that in the quarter Akihabara sell mostly without official guarantee, or machinery is sold out of bins a corporation, has replaced its fleet of vehicles, or bankrupt. So, now you can assume that the Akihabara district is no longer in the first place, this place is now on the right "gadget mecca" in southern China, in Guangdong province in the town subprovintsialnom Shenzhen, near Huakang Lu. The address is not small, true? How can we justify this statement? Probably just personal experience … I wonder if someone reading this article, an idea of what it looks like the Chinese electronics market? This I mean, that is my least ModHouse.com.ua virtual representation (and in the near future I hope more and news portal / store), but the people, suppliers and processes behind them, it is even real! The idea of the portal ModHouse.com.ua ponder and designed for long enough. Of course, conducted the necessary studies and spent a lot of money on petrol and tickets for travel, as well as on different specialists in different fields, where my lawyer did not know enough.