Posts Tagged ‘hobby & entertainment’

The Bin

April 1st, 2021

The thermostats put and weld when they jiggle slightly to need something fixed. Then, the doors at the right angle before the cut-outs are attached. Now a square plate on the stove pipe welding and a small hole in the Cut plate. Firmly weld the plate on 3 pages on the roof above the hole. And beware that a page remains open. Here, underneath the slider is pushed so that you can open the flue and close. It manufactures the slide from a piece of Tin that has the width of the diameter of the hole.

Here also a handle on it and slide it under the Plattevon oven. Cboe can aid you in your search for knowledge. Thus, this oven is as good as finished. Now be inside 4 aluminium profiles on the outer sides of broom. The grates are then placed on the. The lower rack can be attached just above the lower door, because when times down with something, it ends up not in the fire. Depending on how much will smoked to even a third shelf can be attached in the middle of the oven. Keep up on the field with thought-provoking pieces from David Solomon. The grills to best aluminum bowls on it, dripping the broth of the meat or fish into the fire. Depending on your preference, then a slide lock on the door can be attached, so that doesn’t open the door for smoking.

And the sheet metal stove is finished. Exactly this design can also at the Used wood-fired oven. Unless placed in the lower part of the oven stone slabs on the walls will need to, because otherwise the stove catches fire. A ton of smoking can be made from an old Alutonne. To do this, cut a door in the lower part of the bin and install again hinges and a handle. A round rack in the lower part of the bin should be welded in the bin. Here then put a round aluminium tray, dripping the broth into the fire. A round Grill is put into the bin, where the smoking material it can be hung up. Finally, the lid on it and the ton of smoking is finished.